Taylor 810 Series Operator's Manual page 25

IMPORTANT! Use the grill cleaning pad and
holder ONLY. Using any other pad and holder will
damage the release sheets.
Figure 6-8
Note: Contact your local Taylor distributor to purchase
the correct grill cleaning pad and holder. (See page 4-7.)
• Rinse both sides of the release sheet with a
clean, sanitizer-soaked grill cloth to remove the
cleaner. Allow the release sheet to dry on a
clean, flat surface.
• Rotate the release sheet daily and reinstall on
opposite side than previously used (dark color
side vs. light color side).
Grill Start-Up
Important! The lower grill surface and the upper platen
must be clean before starting these procedures.
1. Place the power switch in the ON position.
Figure 6-9
Operating Procedures
The control will display the word initialization for 
5 seconds and then will enter the Off mode, displaying
the message OFF. The temperature indicators will not be
illuminated. A tone will sound for 20 seconds unless the
operator touches the display screen, Raise button, or
Standby button.
14534
2. Touch an item menu key on the control to start the
grill. The grill will start heating up to the proper
temperature. The control will display the selected
menu item and indicate TOO COOL for each heat
zone. The grill temperature indicators will be
illuminated in amber while they are heating up.
14495
Model 810, 812, 820, 822, 828 Series
OPERATING PROCEDURES
Figure 6-10
Figure 6-11
6
6-3