Taylor 810 Series Operator's Manual page 50

LIMITED WARRANTY ON EQUIPMENT
including the upper platen and lower plate, to an operational condition to achieve proper cooking, or allow proper
assembly of release sheets and clips as a result of grease buildup on the cooking surfaces, including but not limited
to the platen and plate, sides of the shroud, or top of the shroud.
4. Replacement of the product's cooking surfaces, including the upper platen and lower plate, due to pitting or
corrosion (or in the case of the upper platen, due to loss of plating) as a result of damage due to the impact of
spatulas or other small wares used during the cooking process or as a result of the use of cleaners, cleaning
materials, or cleaning processes not approved for use by Taylor.
5. Replacement of wear items designated as Class 000 parts in the Taylor Operator's Manual, as well as any release
sheets and clips.
6. External hoses, electrical power supplies, and machine grounding.
7. Parts not supplied or designated by Taylor, or damages resulting from their use.
8. Return trips or waiting time required because a service technician is prevented from beginning warranty service
work promptly upon arrival.
9. Costs incurred to address food safety issues when the technician determines food safety standards are met and
the Product gaps and grill temperatures are within specification.
10. Failure, damage, or repairs due to faulty installation, misapplication, abuse, no or improper servicing, unauthorized
alteration or improper operation or use as indicated in the Taylor Operator's Manual, including but not limited to the
failure to use proper assembly and cleaning techniques, tools, or approved cleaning supplies.
11. Failure, damage, or repairs due to theft, vandalism, wind, rain, flood, high water, water, lightning, earthquake, or
any other natural disaster, fire, corrosive environments, insect or rodent infestation, or other casualty, accident or
condition beyond the reasonable control of Taylor; operation above or below the electrical or gas specification of
the product; or components repaired or altered in any way so as, in the judgment of the manufacturer, to adversely
affect performance, or normal wear or deterioration.
12. Any product purchased over the Internet.
13. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages due to the inadequacy or
interruption of electrical or gas service.
14. Electricity, gas, or other fuel costs, or increases in electricity, gas or other fuel costs from any reason whatsoever.
15. Any special, indirect, or consequential property or commercial damage of any nature whatsoever. Some
jurisdictions do not allow the exclusion of incidental or consequential damages, so this limitation may not apply to
you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to
8
jurisdiction.
8-2
Model 810, 812, 820, 822, 828 Series
Limited Warranty on Equipment