Taylor 810 Series Operator's Manual page 26

OPERATING PROCEDURES
When the grill is at the proper temperature, the
temperature statements will no longer display and the
temperature indicators will be illuminated in green.
Programming Menu Items
To enter the Program mode, the grill control must be in
the Off or Idle mode. The Program mode cannot be
entered If the grill is in the Standby or Cook mode.
1. Press and hold the Program key for approximately 
5 seconds to enter the Program Mode.
6
6-4
Figure 6-12
Figure 6-13
Model 810, 812, 820, 822, 828 Series
2. The PASSWORD screen will appear. Enter the
Operator Password STORE1 and press the OK key.
Figure 6-14
3. The PROGRAM MODE screen will appear,
displaying the version of the software, motor control,
and motor control boot, along with several keys.
Figure 6-15
UNITS Key
The Units key is used to select either English or metric
units of measure. If English is selected, the temperatures
will be displayed in degrees Fahrenheit and gaps will be
displayed in inches. If metric is selected, the
temperatures will be displayed in degrees Celsius and
gaps will be displayed in millimeters.
Operating Procedures