Taylor 810 Series Operator's Manual page 33

Operating Procedures
Cooking Product
1. Select the menu item to be cooked. When the grill is
at the correct temperature, the grill temperature
indicators will be green and the control will not
display any temperature statements.
2. Quickly place the product on the lower grill surface
from front to back per the Patty Placement guide on
page 10. Make sure all product is inside the etched
target zone.
3. Press the STANDBY button once.
Figure 6-27
The display reads MOVING DOWN as the platen lowers
to the cook surface.
Operating Procedures
During the cooking cycle, the display will show the name
of the current menu item, REMOVE IN, and the time
remaining until the product should be removed.
At the end of the cook cycle, the control will display
DONE, a tone will sound, and the platen will
automatically rise.
Note: To cancel a cook cycle at any time, press the
Raise button. A tone will sound and the display will read
CANCEL for 5 seconds and then enter the Idle mode.
Model 810, 812, 820, 822, 828 Series
OPERATING PROCEDURES
Figure 6-28
Figure 6-29
6
6-11