Taylor 810 Series Operator's Manual page 40

OPERATING PROCEDURES
12. Remove, empty, and reinstall the grease cans.
13. Using an approved high-temperature grill cleaner,
pour approximately 3 oz. (90 mL) onto each 12 in.
(305 mm) cook zone.
6
14. Firmly attach the nonabrasive pad to the grill cleaning
pad holder.
IMPORTANT! Use the grill cleaning pad and
holder ONLY. Using any other pad and holder will
damage the release sheets.
15. Dip the pad into the grill cleaner.
Important! Do not scrub while applying grill cleaner in
the following steps.
16. Apply grill cleaner to the front side of the upper
platens.
6-18
Figure 6-53
Figure 6-54
Model 810, 812, 820, 822, 828 Series
Figure 6-55
17. Apply grill cleaner to the bottom of the platen
handles.
Figure 6-56
NOTICE! DO NOT use metal scrapers,
abrasive pads, screens, or wire brushes. Damage to
components may result.
18. Apply grill cleaner to the platen surfaces.
Operating Procedures