Taylor 810 Series Operator's Manual page 44

OPERATING PROCEDURES
47. Wash, rinse, and re-install the grease cans.
48. Wipe all areas with a clean, sanitizer-soaked grill
cloth.
49. Wipe all exterior panels.
For 24-Hour Stores Only
1. Reinstall the release sheets on the opposite side
than previously used.
2. Secure the sheets with the release sheet clips and
retainers.
3. Start the grill per instructions on page 6-1.
6
Non-24-Hour Stores Only
1. Apply a light coat of vegetable oil to the entire lower
grill surface.
6-22
Figure 6-68
Figure 6-69
Model 810, 812, 820, 822, 828 Series
Figure 6-70
2. Leave the upper platens in the OPEN position
overnight.
3. Place the power switch in the OFF position.
Figure 6-71
14549
14583
Operating Procedures