Taylor 810 Series Operator's Manual page 41

Figure 6-57
19. Apply grill cleaner to the back side of the upper
platens.
Figure 6-58
20. Apply grill cleaner to the outer edges of the right and
left platens.
21. Press the STANDBY button twice to lower one of the
platens.
810 Only: Press the STANDBY button twice to lower
the center platen. Apply grill cleaner to both sides of
the center platen.
22. Apply grill cleaner to the inner edges of the right and
left platens.
23. Press the RAISE button to raise the lowered platen.
24. Lightly scrub the front side of the platens and the
bottom of the platen handles with the nonabrasive
pad until all soil has been liquified by the grill cleaner.
For stubborn soils, apply additional grill cleaner and
lightly scrub.
Note: Do not rinse the platens at this time.
25. Lightly scrub the platen cook surfaces.
Operating Procedures
26. Lightly scrub the back side of the upper platens.
27. Lightly scrub the outer edges of the right and left
platens.
28. Press the STANDBY button twice to lower one of the
platens.
810 Only: Press the STANDBY button twice to lower
the center platen. Lightly scrub both sides of the
center platen.
29. Lightly scrub the inner edges of the right and left
platens.
30. Press the RAISE button to raise the lowered platen.
31. With a clean, sanitizer-soaked grill cloth, rinse the
front, sides, and back of the platen surfaces.
32. With a clean, sanitizer-soaked grill cloth, rinse the
bottom of the platen handles and the front, sides, and
back of the platen surfaces.
Model 810, 812, 820, 822, 828 Series
OPERATING PROCEDURES
Figure 6-59
Figure 6-60
6
6-19