Taylor 810 Series Operator's Manual page 49

Section 8
TAYLOR COMPANY LIMITED WARRANTY ON CROWN SERIES GRILLS
Taylor Company is pleased to provide this limited warranty on new Taylor-branded Crown Series grill equipment
available from Taylor to the market generally (the "Product") to the original purchaser only.
Taylor warrants the Product against failure due to defect in materials or workmanship under normal use and service as
follows. All warranty periods begin on the date of original product installation. If a part fails due to defect during the
applicable warranty period, Taylor, through an authorized Taylor distributor or service agency, will provide a new or 
remanufactured part, at Taylor's option, to replace the failed defective part at no charge for the part. Except as
otherwise stated herein, these are Taylor's exclusive obligations under this limited warranty for a Product failure. This
limited warranty is subject to all provisions, conditions, limitations and exclusions listed below and on the reverse (if
any) of this document.
Product
Taylor Crown Series Grills
1. If the date of original installation of the product cannot be verified, then the limited warranty period begins ninety
(90) days from the date of Product manufacture (as indicated by the Product serial number). Proof of purchase may
be required at time of service.
2. This limited warranty is valid only if the product is installed and all required service work on the product is
performed by an authorized Taylor distributor or service agency, and only if genuine, new Taylor parts are used.
3. Installation, use, care, and maintenance must be normal and in accordance with all instructions contained in the
Taylor Operator's Manual.
4. Defective parts must be returned to the authorized Taylor distributor or service agency for credit.
This limited warranty does not cover:
1. Labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing, or handling of
defective parts, replacement parts, or new products.
2. Normal maintenance and cleaning as outlined in the Taylor Operator's Manual, including cleaning of carbon and
grease buildup.
3. Required service, whether cleaning or general repairs, to return the product's cooking surface assemblies,
Limited Warranty on Equipment
Limited Warranty on Equipment
LIMITED WARRANTY
Part
Air compressor (excluding tank, solenoid, 
pressure switch, check valve, air cylinder, 
fittings, and air line)
The upper platen's aluminum casting and
shroud only, and excluding all other upper
platen components, including those internal to
the upper platen
Microprocessor control
Parts not otherwise listed in this table or
excluded below
LIMITED WARRANTY CONDITIONS
LIMITED WARRANTY EXCEPTIONS
Model 810, 812, 820, 822, 828 Series
Limited Warranty Period
Two (2) years
Two (2) years
Three (3) years
One (1) year
8
8-1