Taylor 810 Series Operator's Manual page 29

After the product has been turned, the Standby button will
need to be pressed to bring the platen back down. Once
it reaches the next set gap, the product will cook for
another 60 seconds. After that time has expired, the
platen arm will rise all the way up and the product can be
removed.
Note: Each function is an accumulative timing sequence
in seconds.
SEAR IN—30 seconds
TURN IN—30 seconds
REMOVE IN—60 seconds
Total cook time would be 120 seconds.
Alarm—AUTO/MANUAL: This key displays the current
status of the alarm mode. Pressing the key toggles the
mode to the opposite selection.
If AUTO is selected, the alarm will sound at the end of
the cook cycle automatically and then stop after 
5 seconds.
Selecting MANUAL requires the operator to touch
anywhere on the display screen or the Raise or Standby
buttons to stop the alarm.
Sec: This key displays the time associated with that
menu item in seconds. To increase or decrease the
seconds setting, press and hold the Up and Down arrow
keys.
Gap: Each timing function has an associated gap setting.
This setting can be changed selecting the gap value.
Press and hold the Up and Down arrow keys to increase
and decrease the gap value.
Upon completion of all programming selections, save the
selections by pressing the OK key. To return to the main
display screen without saving the programming
selections, press the EXIT key.
Operating Procedures
Service Contact Information Key
Press the SERVICE CONTACT INFO. key to view the
programmed service contact information.
LANGUAGE Key
The LANGUAGE key selects the language the control
will display. The available languages are English, French,
Portuguese, Russian, and Spanish. See Figure 6-24
STANDBY ALERT—YES Key
Pressing this key toggles between YES and NO. If YES
is selected, an alert will sound when the platen has not
been used for a cook cycle or placed in the Standby
mode for a predetermined amount of time. (See Standby
Alert Timer.) If NO is selected, the platen can still be
placed in the Standby position but there will be no set
timing function associated with it.
Note: This function should be used to help conserve the
energy cost of running the grill during slow times.
VIEW HELP Key
The VIEW HELP key is not functional at this time (future
development).
Model 810, 812, 820, 822, 828 Series
OPERATING PROCEDURES
Figure 6-21
6
6-7