Komatsu PC400LC-5 Operation & Maintenance Manual page 81

Hydraulic excavator
Table of Contents

Advertisement

12. OPERATION
12.1.2 CHECK BEFORE STARTING
Always
carry out the items
in this section
before
starting
the
engine
each day.
CHECK COOLANT
LEVEL, ADD WATER
the coolant,
always
check the radiator
reserve tank when
the
1.
Open the rear cover on the machine
and check that the cooling
water
level is between
the FULL and LOW marks
on radiator
reserve tank @ (shown
in the diagram
on the right).
If the water
level is low, add water
through
the water
filler of
reserve tank 0
and radiator
filler @ to the FULL level.
2.
After adding
water,
tighten
the caps securely.
3.
If the reserve tank becomes
empty,
first inspect for water
leaks
and then fill the radiator
and the reserve tank with water.
CHECK OIL LEVEL IN ENGINE
OIL PAN, ADD OIL
Open the rear cover on the machine.
Remove
dipstick @ and wipe the oil off with a cloth.
Insert dipstick @ fully in the oil filler pipe, then take it out again.
The oil level should
be between
the H and L marks on dipstick
0.
If the oil level is below the L mark, add engine oil through
oil filler
0.
For details of the oil to use, see "20. USE OF FUEL, COOLANT
AND
LUBRICANTS
ACCORDING
TO AMBIENT
TEMPERATURE".
AD052340
2-37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc400Pc400-5 mightyPc400hd-5

Table of Contents