Komatsu PC400LC-5 Operation & Maintenance Manual page 52

11. EXPLANATION OF COMPONENTS
11 .I.3 C: EMERGENCY STOP ITEMS
idling, and take the following action.
1. ENGINE WATER TEMPERATURE
If the temperature of the engine cooling water becomes abnor-
mally high, the monitor lamp flashes, and the overheat prevention
system is automatically actuated to reduce the engine speed.
Stop operations and run the engine at low idling until the engine
water temperature gauge enters the green range.
AD096920
2. RADIATOR WATER LEVEL
If the radiator water level drops, the monitor lamp flashes. Stop
the engine, check the radiator water level, and add water if neces-
sa ry.
AD096670
3. ENGINE OIL PRESSURE
If the engine oil pressure drops below the normal pressure, the
monitor lamp flashes. At this item, stop the engine and inspect it
according to "16.6 OTHER TROUBLE."
REMARK
While the starting switch is ON, the lamp remains lit and goes
off once the engine is started. When the engine starts, the buzzer
may sound for a short time, however, this does not indicate a fault.
AD096940
2-8