16.6.4 ELECTRONIC CONTROL SYSTEM
MONITOR PANEL
When the starting switch is turned ON before starting the engine,
all the monitor
lamps and the gauges
light up and the alarm buzzer
sounds for about 3 seconds.
If any monitor
lamp does not light up,
there is probably
a broken bulb or disconnection
in the monitor,
so
ask your Komatsu
distributor
to inspect it.
Park the machine
on level ground and check the monitor
lamps.
ENGINE THROTTLE CONTROLLER AND PUMP CONTROLLER
If any abnormality
occurs, the abnormality
is indicated
by the
lamp
and an 8-digit
code.
Check the content
of the display
and
contact your Komatsu
distributor
for repairs.
Pump controller
Engine throttle
controller
2-98