28.1.2 ADJUST THE BELT LENGTH
To shorten
the blet
Pull the free end of the belt on either the buckle body or tongue
side.
AE078090
To lengthen
the belt
Pull the belt while holding it at a right angle to buckle or tongue.
Inspect bolts and fittings on the chassis for tightness.
Retighten
any
loose bolts to 20 - 29 Nm (2 - 3 kgm, 15 - 20 Ibft) torque.
If the seat is scratched
or frayed or if any of the fittings are broken
or deformed
from
long service,
replace the seat belt immediately.
0
w
AE078100
5-6