Komatsu PC400LC-5 Operation & Maintenance Manual page 121

13. TRANSPORTATION
2.
Set the travel speed switch to the 41) (Low) position.
r
3. Turn the auto-deceleration switch OFF, and return the fuel con-
trol dial to reduce the engine speed.
I
AD097040
4.
Turn the
swing
lock switch ON to apply the swing lock.
ONlactuatedL
5. Set in the direction of the ramps, lower the work equipment as
far as possible without letting it hit the trailer, then travel slowly
to load or unload the machine.
When on the ramps, do not operate any lever other than the travel
lever.
6. Load the machine correctly in the specified position on the
Front of machine AE081650
OFF(canceled)
trailer.
REMARK
When the work equipment is installed, load the machine from
the front; when the work equipment is not installed, load the
machine from the rear.
2-77