Komatsu PC400LC-5 Operation & Maintenance Manual page 224

27. HANDLING BUCKET WITH HOOK
27.1 ;;kylNG FOR DAMAGE TO BUCKET WITH
Check that there is no damage to the hook, stopper, or hook
mount. If any abnormality is found, please contact your Komatsu
distributor.
27.2 PROHIBITED OPERATIONS
The standard work equipment must not be used for lifting loads.
If this machine is to be used for lifting loads, it is necessary to install
the specified bucket with hook.
27.3 PRECAUTIONS DURING OPERATIONS
When carrying out lifting operations, reduce the engine speed
and use the lifting operation mode.
Depending on the posture of the work equipment, there is
danger that the wire or load may slip off the hook.
Always be careful to maintain the correct hook angle to prevent
this from happening.
Never steer the machine while lifting a load.
If the bucket with hook is turned and used for operations, it will
hit the arm during dumping operations, so be careful when
using it.
Loads suspended must not exceed the limit indicated in the
"LIFTING CAPACITYTABLE" stuck on the right-side lower portion
of the driver's seat.
If you wish to install a hook in the future, please contact your
Komatsu distributor.
INCORRECT
AE099000
CORRECT
AE099010
INCORRECT
AE099020
5-4