Select Application - Agilent Technologies E4406A VSA Series Programmer's Manual

Language Reference
INSTrument Subsystem

Select Application

:INSTrument[:SELect]
BASIC|SERVICE|CDMA|CDMA2K|GSM|EDGEGSM|IDEN|NADC|PDC|
WCDMA|ARIBWCDMA
:INSTrument[:SELect]?
Select the measurement application (mode). The actual available
choices depends upon which applications are installed in the
instrument. A list of the valid choices can be seen on the display by
pressing
System, Show System
Once the instrument mode is selected, only the commands that are
valid for that mode can be executed. SYSTem:HELP:HEADers? can be
used provide a list of the valid commands.
Basic mode - Makes basic receiver measurements
Service mode - Used only for servicing the instrument
CDMA mode - Makes cdmaOne (code division multiple access)
standard measurements
CDMA2K mode - Makes cdma2000 (wide-band code division
multiple access) standard measurements
EDGEGSM mode - Makes GSM (global system for mobile
communications) and EDGE (enhanced data rates for global
evolution) standard measurements
GSM mode - Makes GSM (global system for mobile communications)
standard measurements
IDEN mode - Makes iDEN (integrated digital enhanced network)
standard measurements
NADC mode - Makes NADC (North American Digital Cellular)
standard measurements
PDC mode - Makes PDC (Personal Digital Cellular) standard
measurements
WCDMA mode - Makes W-CDMA (wide-band CDMA) measurements
for the 3GPP (third generation partnership project) standards
ARIBWCDMA mode - Makes W-CDMA (wide-band CDMA)
measurements for the trial 98 and ARIB standards
Factory Preset
and *RST: Persistent state with factory default of the first
installed application other than the service mode.
Front Panel
Access:
Mode
232
and looking at the Name column.
Chapter 5