ABORt Subsystem
Abort
:ABORt
Stops any sweep or measurement in progress and resets the sweep or
trigger system. A measurement refers to any of the measurements
found in the
MEASURE
If INITiate:CONTinuous is off (single measure), then
INITiate:IMMediate will start a new single measurement.
If INITiate:CONTinuous is on (continuous measure), a new
continuous measurement begins immediately.
The INITiate and TRIGger subsystems contain additional related
commands.
Front Panel
Access:
For the continuous measurement mode, the
is equivalent to ABORt
Chapter 5
menu.
Language Reference
ABORt Subsystem
key
Restart
177