Memory Subsystem - Agilent Technologies E4406A VSA Series Programmer's Manual

MEMory Subsystem

The purpose of the MEMory subsystem is to manage instrument
memory. This specifically excludes memory used for mass storage which
is defined in the MMEMory Subsystem.
Install Application
:MEMory:INSTall:APPLication <filename>
Installs the specified application from an external drive to the
instrument. Each application allows you to make a specific set of
measurements easily and accurately. Installation requires a
12-character license key that you received with your application. The
license key number is unique to the option and instrument serial
number. If it cannot be located, contact your local Hewlett-Packard
Sales and Service office to re-obtain the information. (Have the
instrument model number, option and serial number available.)
Front Panel
Access:
System, Uninstall
Un-install Application
:MEMory:UNINstall:APPLication <filename>
Uninstalls (deletes) the specified application from the instrument
memory. Re-installation of these programs requires a license key that
can be found in the documentation. It can also be found in the
information screen. Please make a note of this number as it will
Options
be needed later to re-install the application.
Front Panel
Access:
System, Uninstall
Chapter 5
Language Reference
MEMory Subsystem
,
System
257