Off|On|0|1, Off|On|0|1 - Agilent Technologies E4406A VSA Series Programmer's Manual

Adjacent Channel Power—Automatic Sweep Time
[:SENSe]:ACP:OFFSet:LIST:SWEep:TIME:AUTO OFF|ON|0|1,
OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1
[:SENSe]:ACP:OFFSet:LIST:SWEep:TIME:AUTO?
Sets the sweep time to be automatically coupled for the fastest
measurement time. You can turn off (not use) specific offsets with the
SENS:ACP:OFFSet:LIST:STATe command.
Factory Preset
and *RST:
Mode Offset A
Basic & On
cdmaOne
Remarks: You must be in Basic, cdmaOne mode to use this
command. Use INSTrument:SELect to set the mode.
History: Revision A.03.00 or later, in cdmaOne revision A.04.00
Adjacent Channel Power—Define Type of Offset Frequency List
iDEN mode
[:SENSe]:ACP:OFFSet:TEST ABSolute|AND|OR|RELative
[:SENSe]:ACP:OFFSet:TEST?
Basic mode, cdmaOne
[:SENSe]:ACP:OFFSet:LIST:TEST ABSolute|AND|OR|RELative,
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative,
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative
[:SENSe]:ACP:OFFSet:LIST:TEST?
cdma2000, W-CDMA (3GPP) mode
[:SENSe]:ACP:OFFSet[n]:LIST:TEST ABSolute|AND|OR|RELative,
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative,
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative
[:SENSe]:ACP:OFFSet[n]:LIST:TEST?
cdmaOne, W-CDMA (Trial & Arib) mode
[:SENSe]:ACP:OFFSet[n]:LIST[n]:TEST
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative,
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative,
ABSolute|AND|OR|RELative
[:SENSe]:ACP:OFFSet[n]:LIST[n]:TEST?
Chapter 5
Offset B Offset C
On On
Language Reference
SENSe Subsystem
Offset D Offset E
On On
283