Ricoh Pro C7200 Operating Instructions Manual page 305

3. The trailing edge of the sheet, while delivered, is left in the paper exit.
Stacker shift tray
4. The next sheet to be delivered slips under the sheet still in the paper exit and bends back.
Stacker shift tray
Solution:
Straighten out the sheet by decurling it upward.
1. Load the sheets the other way up.
2. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
To follow the steps below, attach the decurler unit.
3. In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Operators]
menu, set 0304: [Correct Output Paper Curl] to [U Curl Correction Level: Small].
4. Print the image. Has the problem been resolved?
Yes Finished!
Paper exit
Paddle
Paper feed direction
CEZ575
Paper exit
Paddle
Paper feed direction
CEZ576
High Capacity Stacker
303