Ricoh Pro C7200 Operating Instructions Manual page 132

7. Image Quality Problem: Full Page
Cause:
This may occur if:
• Printing is done at low temperature or humidity
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
Solution:
(a) Decreasing the transfer timing roller speed
1. In [Advanced Settings] for the custom paper you are using, select 1341: [Motor Speed],
and then check the present value in [Transfer Timing Roller]. Is it lower than -0.5%?
Yes
No
2. Select 1341: [Motor Speed], and then decrease the value in [Transfer Timing Roller] by
0.1%.
3. Print the image. Has the problem been resolved?
Yes
No
130
90 mm
(3.5 in.)
Proceed to "(c) Increasing the transfer timing roller speed".
Go to the next step.
Finished!
Go to the next step.
90 mm
(3.5 in.)
CEZ564