7. Image Quality Problem: Full Page
Stretched Image
The leading edge margin is too wide and the image has stretched lengthwise.
Paper feed direction
Cause:
The paper feed speed of the transfer timing roller is too low.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
Solution:
Increase the feed speed of the transfer timing roller.
1.
In [Advanced Settings] for the custom paper you are using, select 1341: [Motor Speed]
and increase the value in [Transfer Timing Roller] by 0.1%.
2.
Print the image. Has the problem been resolved?
Yes
No
Shrunken Image
The leading edge margin is too narrow and the image has shrunk lengthwise.
194
Original
Output
CEZ530
Finished!
Keep increasing the value by 0.1% until the problem is resolved.
If the problem persists even though you have increased the value by 1.0%, contact
your service representative.
Need help?
Do you have a question about the Pro C7200 and is the answer not in the manual?
Questions and answers