Fitting The Spider - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Assembly

9.3.3 Fitting the spider

Tools:
- Sleeve with 16 mm outer diameter
- Plastic hammer
- Socket wrench
2
4
C-SC_CSSM
1.
1
2.
3.
4.
3
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press in the bush (1).
Repeat step 1 on the opposite side of the machine.
Position the feather key (2).
Screw in the three handles (3).
Position the spider (4).
23.01.2019 Page 65 of 75