Metal core drilling
Disassembly
8.1.6 Removing the protective hose
Steps that must be completed:
-
Removing the electronics
Tools:
-
Torx T20
-
PH2 cross-tip screwdriver
-
Socket head wrench, 6 mm
-
Side-cutting pliers
1
2
4
6
9
C-SC_CSSM
3
5
7
8
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Unscrew the three screws (1).
2.
Remove the cover (2).
3.
Unscrew the screw (3).
4.
Unscrew the screw (4).
5.
Remove the housing (5).
6.
Undo the cable tie (6).
7.
Remove the two cables (7).
8.
Remove all connectors.
9.
Remove the two terminals (8).
10.
Remove the protective hose (9).
23.01.2019
Page 19 of 75