Metal core drilling
Assembly
9.1.6 Fitting the gearbox parts
Steps that must be completed:
-
Fitting the grooved ball bearings
-
Assembling the clutch and shafts
2
4
3
C-SC_CSSM
1.
1
2.
3.
4.
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the two gear wheels (1).
Position the clutch (2).
Position the seal (4).
Position the bolt (3).
Fill the gearbox with 500 g grease.
23.01.2019
Page 52 of 75