Disassembling The Shaft - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Disassembly

8.3.5 Disassembling the shaft

Steps that must be completed:
- Removing the carbon brushes
- Removing the guide
- Removing the intermediate gearbox
- Removing the gearbox parts
- Removing the shaft
Tools:
- Circlip pliers
- Arbor press
- Sleeve with 55 mm inner diameter
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1).
Remove the grooved ball bearing (2).
23.01.2019 Page 39 of 75