Fitting The Electronics - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Assembly

9.3.6 Fitting the electronics

Steps that must be completed:
- Fitting the network cable
- Fitting the magnetic foot
Tools:
- PH2 cross-tip screwdriver
4
3
2
C-SC_CSSM
1.
2.
3.
4.
1
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the two cables (1).
Screw in the two screws (2) [2.0 Nm].
Position the electronics (3).
Screw in the four screws (4) [1.5 Nm].
23.01.2019 Page 69 of 75