Fitting The Switches - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Assembly

9.3.7 Fitting the switches

Steps that must be completed:
- Fitting the network cable
- Fitting the magnetic foot
- Fitting the electronics
Tools:
- Torx T15
1
3
C-SC_CSSM
1.
2.
2
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the three buttons (1).
Position the two switches (2).
Position the LED (3).
Connect all connectors as shown in the connection
diagram.
23.01.2019 Page 70 of 75