Removing The Grooved Ball Bearings - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Disassembly

8.3.6 Removing the grooved ball bearings

Steps that must be completed:
- Removing the carbon brushes
- Removing the guide
- Removing the intermediate gearbox
- Removing the gearbox parts
- Removing the shaft
Tools:
- Circlip pliers
- Inner bearing puller 8–12 mm; 12–16 mm; 25 mm
- Slide hammer
1
2
3
C-SC_CSSM
1.
2.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Pull off the four grooved ball bearings (1).
Remove the circlip (2).
Remove the grooved ball bearing (3).
23.01.2019 Page 40 of 75