Removing The Intermediate Gearbox - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Disassembly

8.2.3 Removing the intermediate gearbox

Steps that must be completed:
- Removing the carbon brushes
- Removing the guide
Tools:
- 6 mm hexagon socket
- PH2 cross-tip screwdriver
1
2
4
C-SC_CSSM
1.
2.
3.
3
4.
5.
5
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the two cylinder head screws (1).
Repeat step 1 on the opposite side of the machine.
Remove the intermediate gearbox (2) from the gearbox
housing (3).
Unscrew the four screws (4).
Remove the intermediate gearbox (2) from the motor
housing (5).
23.01.2019 Page 29 of 75