Metal Core Drilling
Disassembly
Removing the spider
Steps that must be completed:
-
Removing the guide
Tools:
-
Circlip pliers
-
Inner bearing puller, 18–22 mm
-
Slide hammer
3
C-SC_CSSM
1.
1
2.
2
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1).
Pull out the spider (2).
Remove the bushing (3).
Repeat step 3 on the opposite side of the machine.
01.04.2021
34130550060
Printed in Germany
Page 48 of 92