Fitting The Intermediate Gearbox - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Assembly

9.2.3 Fitting the intermediate gearbox

Steps that must be completed:
- Fitting the stator
- Fitting the grooved ball bearings
- Fitting the armature
Tools:
- PH2 cross-tip screwdriver
1
2
3
4
C-SC_CSSM
1.
2.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press in the three grooved ball bearings (1).
Position the armature (2) in the intermediate gearbox (3).
Screw in the two fillister head screws (4).
23.01.2019 Page 57 of 75