Disassembling The Intermediate Gearbox - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Disassembly

8.2.4 Disassembling the intermediate gearbox

Steps that must be completed:
- Removing the carbon brushes
- Removing the guide
Tools:
- PH2 cross-tip screwdriver
1
2
3
4
C-SC_CSSM
1.
2.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the two fillister head screws (1).
Remove the armature (2) from the intermediate gearbox
(3).
Remove the three grooved ball bearings (4).
23.01.2019 Page 30 of 75