Fitting The Magnetic Foot - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Assembly

9.3.4 Fitting the magnetic foot

Tools:
- Socket head wrench, 6 mm
- Open-ended spanner 19 mm
1
1
3
C-SC_CSSM
1.
2.
3.
2
4.
4
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the magnetic foot (1).
Screw in the two cylinder head screws [M8x22] (2).
Repeat step 2 on the opposite side of the machine.
Screw in the screw (3).
Screw in the nut (4).
23.01.2019 Page 67 of 75