Metal core drilling
Disassembly
8.2 Disassembling the motor housing
8.2.1 Removing the carbon brushes
Steps that must be completed:
-
Removing the protective hose
-
Removing the guide
-
Removing the motor
Tools:
-
PH2 cross-tip screwdriver
1
2
4
5
6
7
C-SC_CSSM
1.
2.
3.
4.
3
5.
6.
7.
8.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the screw (1).
Remove the cover (2).
Lift up the spring (3).
Pull off the plug (4).
Remove the carbon brush (5).
Unscrew the screw (6).
Remove the carbon brush holder (7).
Repeat steps 1 to 7 on the opposite side of the machine.
23.01.2019
Page 27 of 75