Metal core drilling
Disassembly
8.3.4 Removing the shaft
Steps that must be completed:
-
Removing the carbon brushes
-
Removing the guide
-
Removing the intermediate gearbox
-
Removing the gearbox parts
Tools:
-
Circlip pliers
-
Arbor press
-
Sleeve with 78 mm inner diameter
1
2
C-SC_CSSM
1.
2.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1).
Remove the circlip (2).
Press out the shaft (3).
23.01.2019
Page 37 of 75