Tools, Lubricants And Auxiliary Substances Required; Standard Tools; Special Tools - Fein KBU 110-4 M Repair Instructions

Metal core drilling

Tools, lubricants and auxiliary substances required

6 Tools, lubricants and auxiliary substances required

6.1 Standard tools

Cross-tip screwdriver
Torx
Socket wrench
Socket head wrench set
Socket head wrench with pin
Circlip pliers
Plastic hammer
Arbor press
Side-cutting pliers
Punch
Magnet
Inner bearing puller set
Slide hammer
Socket wrench
Socket wrench insert
Open-ended spanner
Sleeve

6.2 Special tools

Drawing-off socket cap
Chuck cone
C-SC_CSSM
26 mm
diameter
32 mm
diameter
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
PH2
T15; T20
13 mm
5 mm
1 mm; 2 mm
7 mm
19 mm
78 mm inner diameter
55 mm inner diameter
16 mm outer diameter
6 41 04 150 00 0
6 41 07 026 00 0
6 41 07 032 00 0
23.01.2019 Page 11 of 75