Fein KBE 52-2 M Repair Instructions
  1. Manuals
  2. Brands
  3. Fein Manuals
  4. Drill
  5. KBE 52-2 M
  6. Repair instructions

Fein KBE 52-2 M Repair Instructions

Hide thumbs Also See for KBE 52-2 M:
Table of Contents

Advertisement

Quick Links

Download this manual
Metal Core Drilling
Repair instructions
Applies to:
KBE 52-2 M, JME 202 M
34130550060
Printed in Germany

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KBE 52-2 M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Fein KBE 52-2 M

Summary of Contents for Fein KBE 52-2 M

  • Page 1 34130550060 Metal Core Drilling Printed in Germany Repair instructions Applies to: KBE 52-2 M, JME 202 M...

  • Page 2: Table Of Contents

    Removing the electronics ....................37 Disassembling the mains cable ..................39 C-SC_CSSM Version 1.0 01.04.2021 Page 2 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 3 Assembling the intermediate gear box................83 Positioning the intermediate gear box ................84 C-SC_CSSM Version 1.0 01.04.2021 Page 3 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 4 Positioning the container ......................91 10 Inspection following repairs ......................92 C-SC_CSSM Version 1.0 01.04.2021 Page 4 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 5: Models Described

    JME 202 M 7 270 69 ..C-SC_CSSM Version 1.0 01.04.2021 Page 5 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 6: Technical Data

    Connection diagram The connection diagram can be found in the FEIN electronic information system. Inspection following repairs Further information about the inspection steps required after repairs can be found in the FEIN electronic information system. Documents required for further repair work...

  • Page 7: Symbols Used

    Part of the navigation interface. C-SC_CSSM Version 1.0 01.04.2021 Page 7 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 8: Notes And Requirements

    C. & E. Fein GmbH assumes no responsibility for the completeness, relevance, quality or correctness of the information provided. Liability claims against C. & E. Fein GmbH that relate to material or immaterial damage caused by the use or failure to use the information provided or by the use of incorrect or incomplete information are excluded.

  • Page 9: Safety Instructions

    Measure that must be taken in order to avoid this danger. C-SC_CSSM Version 1.0 01.04.2021 Page 9 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 10 Only perform assembly/disassembly work on electronics at a workstation with ESD protection. Avoiding the failure of electronics C-SC_CSSM Version 1.0 01.04.2021 Page 10 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 11: Tools, Lubricants And Auxiliary Substances Required

    26 mm outer diameter 26 mm inner diameter 30 mm outer diameter C-SC_CSSM Version 1.0 01.04.2021 Page 11 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 12: Special Tools

    150 g Gearbox Grease SM 0016 Guide, gear rack C-SC_CSSM Version 1.0 01.04.2021 Page 12 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 13: Test And Diagnostics Options

    Metal Core Drilling Printed in Germany Test and diagnostics options Test and diagnostics options Test data The permitted parameters for the machine can be found in the FEIN electronic information system. C-SC_CSSM Version 1.0 01.04.2021 Page 13 of 92 All rights reserved by FEIN, especially in case of property rights applications.

  • Page 14: Disassembly

    Remove the container (1). Remove the hose (2) from the hose socket. C-SC_CSSM Version 1.0 01.04.2021 Page 14 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 15: Removing The Motor Housing

    Repeat steps 1 to 5 on the opposite side of the machine. C-SC_CSSM Version 1.0 01.04.2021 Page 15 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 16: Removing The Drill Motor

    Slide the drill motor (5) out of the guide. C-SC_CSSM Version 1.0 01.04.2021 Page 16 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 17 Removing the drill motor Remove the pressure piece (1). C-SC_CSSM Version 1.0 01.04.2021 Page 17 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 18: Removing The Intermediate Gear Box

    Unscrew the four screws with washers (3). Remove the intermediate gear box (4). C-SC_CSSM Version 1.0 01.04.2021 Page 18 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 19: Disassembling The Intermediate Gear Box

    Remove the three deep groove ball bearings (2). C-SC_CSSM Version 1.0 01.04.2021 Page 19 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 20: Disassembling The Armature

    Remove the plate (4). Remove the grooved ball bearing (5). C-SC_CSSM Version 1.0 01.04.2021 Page 20 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 21: Removing The Motor Housing

    Remove the cover (2). Remove the air guide ring (3). C-SC_CSSM Version 1.0 01.04.2021 Page 21 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 22 Pull off the plug (3). Remove all components from the motor housing. C-SC_CSSM Version 1.0 01.04.2021 Page 22 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 23: Disassembling The Drill Chuck

    Unscrew the nut (1) [left-hand thread]. Turn the shaft into position (2). C-SC_CSSM Version 1.0 01.04.2021 Page 23 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 24 8.3.1 Removing the mounting shaft Remove the shaft (1). C-SC_CSSM Version 1.0 01.04.2021 Page 24 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 25: Disassembling The Mounting Shaft

    Remove the disc (5). Remove the spiral spring with sleeve (6). C-SC_CSSM Version 1.0 01.04.2021 Page 25 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 26 Remove the two pins (1). Remove the spiral spring (2). C-SC_CSSM Version 1.0 01.04.2021 Page 26 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 27: Removing The Gearbox Housing

    Remove the two straight pins (3). Remove the two gearwheels (4). C-SC_CSSM Version 1.0 01.04.2021 Page 27 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 28 Remove the rotary knob (2). Remove the sealing ring (3). C-SC_CSSM Version 1.0 01.04.2021 Page 28 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 29 Photo shows similar product Remove the feather key (3). C-SC_CSSM Version 1.0 01.04.2021 Page 29 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 30: Removing The Shaft

    Press out the shaft (2). Photo shows similar product C-SC_CSSM Version 1.0 01.04.2021 Page 30 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 31: Disassembling The Shaft

    Press the grooved ball bearing (2) off the shaft. C-SC_CSSM Version 1.0 01.04.2021 Page 31 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 32: Disassembling The Gearbox Parts

    Punch, 7 mm Remove the two deep groove ball bearings (1). C-SC_CSSM Version 1.0 01.04.2021 Page 32 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 33 Remove the three sealing rings (2). Remove the circlip (3). C-SC_CSSM Version 1.0 01.04.2021 Page 33 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 34 Remove the feather key (2). Press the gearwheel (3) off the shaft. C-SC_CSSM Version 1.0 01.04.2021 Page 34 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 35: Disassembling The Drill Jig

    Press and hold the lock (5) on the plug. Pull off the plug. C-SC_CSSM Version 1.0 01.04.2021 Page 35 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 36: Disassembling The Control Panel

    Remove the two buttons (1). Remove the switch (2). C-SC_CSSM Version 1.0 01.04.2021 Page 36 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 37: Removing The Electronics

    Disconnect the cable (4). Remove the cover (5) with the electronics. C-SC_CSSM Version 1.0 01.04.2021 Page 37 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 38 Unscrew the two screws (2). Remove the electronics (3). C-SC_CSSM Version 1.0 01.04.2021 Page 38 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 39: Disassembling The Mains Cable

    Torx T15 Remove the cover (1). Unscrew the screw (2). C-SC_CSSM Version 1.0 01.04.2021 Page 39 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 40 Remove the cable clamp (4). Remove the mains cable (5). C-SC_CSSM Version 1.0 01.04.2021 Page 40 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 41: Removing The Magnetic Base

    Remove the magnetic base (3). Photo shows similar product C-SC_CSSM Version 1.0 01.04.2021 Page 41 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 42: Disassembling The Magnetic Base

    PH2 cross-head screwdriver Unscrew the screw (1). Remove the cable (2). C-SC_CSSM Version 1.0 01.04.2021 Page 42 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 43: Removing The Protective Hose

    Photo shows similar product Remove the sealing ring (3). C-SC_CSSM Version 1.0 01.04.2021 Page 43 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 44: Disassembling The Protective Hose

    Remove the connecting cable (1). Remove the connecting piece (2). C-SC_CSSM Version 1.0 01.04.2021 Page 44 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 45: Removing The Guide

    Unscrew the screw (2). Remove the gear rack (3). C-SC_CSSM Version 1.0 01.04.2021 Page 45 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 46 Remove the leaf spring (3). Unscrew the six set screws (4). C-SC_CSSM Version 1.0 01.04.2021 Page 46 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 47 Remove the two guide rails. Remove the pressure piece (2). C-SC_CSSM Version 1.0 01.04.2021 Page 47 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 48: Removing The Spider

    Repeat step 3 on the opposite side of the machine. C-SC_CSSM Version 1.0 01.04.2021 Page 48 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 49: Disassembling The Spider

    Unscrew the three handles (3). Photo shows similar product C-SC_CSSM Version 1.0 01.04.2021 Page 49 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 50: Assembly

    Position the washer (3). Coat the shaft with grease. C-SC_CSSM Version 1.0 01.04.2021 Page 50 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 51: Positioning The Spider

    Repeat step 1 on the opposite side of the machine. Position the spider (2). Position the circlip (3). C-SC_CSSM Version 1.0 01.04.2021 Page 51 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 52: Positioning The Guide

    Position the two guide rails. Unscrew the twelve screws (2). C-SC_CSSM Version 1.0 01.04.2021 Page 52 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 53 Screw in the screw (3) [1.1 Nm ±0.15 Nm]. C-SC_CSSM Version 1.0 01.04.2021 Page 53 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 54 Screw in the screw (4) [3.0 Nm ±0.3 Nm]. C-SC_CSSM Version 1.0 01.04.2021 Page 54 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 55: Assembling The Protective Hose

    Position the connecting cable (1). Position the connecting piece (2). C-SC_CSSM Version 1.0 01.04.2021 Page 55 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 56: Positioning The Protective Hose

    Photo shows similar product Connect the cable to the plug (3). C-SC_CSSM Version 1.0 01.04.2021 Page 56 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 57: Assembling The Magnetic Base

    ±0.2 Nm Screw in the screw (2) [1.5 Nm C-SC_CSSM Version 1.0 01.04.2021 Page 57 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 58: Positioning The Magnetic Base

    Screw in the screw (3) [1.5 Nm ±0.2 Nm]. C-SC_CSSM Version 1.0 01.04.2021 Page 58 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 59: Assembling The Electronics

    Position the cover (3) with the electronics. Place the protective hose (4) in the recess. C-SC_CSSM Version 1.0 01.04.2021 Page 59 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 60 ±0.2 Nm Screw in the screw (3) [1.5 Nm C-SC_CSSM Version 1.0 01.04.2021 Page 60 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 61: Fitting The Network Cable

    Screw in the screw (5) [1.8 Nm Screw in the screw (6). C-SC_CSSM Version 1.0 01.04.2021 Page 61 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 62 Connect all plug connections (2) as shown in the connection diagram. Position the control panel (3). C-SC_CSSM Version 1.0 01.04.2021 Page 62 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 63: Assembling The Control Panel

    Position the two buttons (1). Position the switch (2). C-SC_CSSM Version 1.0 01.04.2021 Page 63 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 64: Positioning The Control Panel

    Connect all plug connections (2) as shown in the connection diagram. C-SC_CSSM Version 1.0 01.04.2021 Page 64 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 65 ±0.3 Nm Screw in the two screws [4x48] (6) [2.0 C-SC_CSSM Version 1.0 01.04.2021 Page 65 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 66: Assembling The Drill Chuck

    Press in the circlip (5). NFORMATION The circlip (5) clicks audibly into place. C-SC_CSSM Version 1.0 01.04.2021 Page 66 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 67 Position the circlip (3). Screw in the two pins (4). C-SC_CSSM Version 1.0 01.04.2021 Page 67 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 68: Positioning The Mounting Shaft

    Screw in the nut (2) [left-hand thread]. Photo shows similar product C-SC_CSSM Version 1.0 01.04.2021 Page 68 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 69: Assembling The Gearbox Housing

    Position the feather key (1). Position the gearwheel (2). C-SC_CSSM Version 1.0 01.04.2021 Page 69 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 70 Apply grease to the three sealing rings (5). Position the three sealing rings (5). C-SC_CSSM Version 1.0 01.04.2021 Page 70 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 71 1. Press in the two deep groove ball bearings (1). C-SC_CSSM Version 1.0 01.04.2021 Page 71 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 72: Assembling The Shaft

    Press on the deep groove ball bearing (1). Position the circlip (2). C-SC_CSSM Version 1.0 01.04.2021 Page 72 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 73: Positioning The Shaft

    Position the circlip (2). Position the feather key (3). C-SC_CSSM Version 1.0 01.04.2021 Page 73 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 74: Positioning The Gearbox Parts

    Apply grease to the sealing ring (3). Position the sealing ring (3). C-SC_CSSM Version 1.0 01.04.2021 Page 74 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 75 Position the seal (5). Fill the gearbox with 150 g of grease. C-SC_CSSM Version 1.0 01.04.2021 Page 75 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 76: Assembling The Motor Housing

    Press on the grooved ball bearing (2). Press on the sealing ring (3). C-SC_CSSM Version 1.0 01.04.2021 Page 76 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 77 Correctly position the sealing ring (1). Press on the grooved ball bearing (2). C-SC_CSSM Version 1.0 01.04.2021 Page 77 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 78: Fitting The Stator

    Note the recesses when laying the cables. Position the cable (2). Position the cable (3). C-SC_CSSM Version 1.0 01.04.2021 Page 78 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 79 Guide the cable (4) through the opening for the carbon brushes. C-SC_CSSM Version 1.0 01.04.2021 Page 79 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 80 Position the stator (1). Connect the cable (2). Connect the cable (3). C-SC_CSSM Version 1.0 01.04.2021 Page 80 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 81 Connect the cable (2) to the stator. NFORMATION Note the position of the stator. C-SC_CSSM Version 1.0 01.04.2021 Page 81 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 82: Assembling The Motor Housing

    Position the cover (3). Screw in the two screws (4) [2.0 Nm]. C-SC_CSSM Version 1.0 01.04.2021 Page 82 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 83: Assembling The Intermediate Gear Box

    Note the position of the plate (3). Press in the armature (2). C-SC_CSSM Version 1.0 01.04.2021 Page 83 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 84: Positioning The Intermediate Gear Box

    Screw in the four screws with washers (3) [3.0 Nm]. C-SC_CSSM Version 1.0 01.04.2021 Page 84 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 85: Positioning The Gearbox Housing

    Screw in the four screws (2) [8.0 Nm NFORMATION Screw in the four screws crosswise. C-SC_CSSM Version 1.0 01.04.2021 Page 85 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 86: Positioning The Carbon Brushes

    Position the carbon brush (2). Position the spring (3). C-SC_CSSM Version 1.0 01.04.2021 Page 86 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 87 Repeat steps 3 to 5 on the opposite side of the machine. C-SC_CSSM Version 1.0 01.04.2021 Page 87 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 88: Positioning The Drill Motor

    Do not place hands under the drill motor (2). Slide the drill motor (2) into the guide. C-SC_CSSM Version 1.0 01.04.2021 Page 88 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 89 Screw in the screw (2) [2.7 Nm ±0.3 Nm]. C-SC_CSSM Version 1.0 01.04.2021 Page 89 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 90: Setting The Guide

    C-SC_CSSM Version 1.0 01.04.2021 Page 90 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 91: Positioning The Container

    Position the container (1). Place the hose on the hose socket (2). C-SC_CSSM Version 1.0 01.04.2021 Page 91 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 92: Inspection Following Repairs

    Check magnetic holding force If restart lock present: Check restart lock C-SC_CSSM Version 1.0 01.04.2021 Page 92 of 92 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

This manual is also suitable for:

Jme 202 m

Table of Contents