Remove The Pcie Riser Board Assembly; Install The Pcie Riser Board Assembly - HPE ProLiant XL230a Gen9 User Manual

Remove the PCIe riser board assembly

Power down the server (on page 15).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 16).
3.
Place the server on a flat, level work surface.
4.
Remove the PCIe riser board assembly.
5.
Disconnect all cables connected to existing expansion boards.
6.

Install the PCIe riser board assembly

Connect all cables to existing expansion boards.
1.
Align the PCIe riser board with the corresponding connector on the system board, and then press
2.
down the PCIe riser board assembly.
Operations 22