Page 1
Important Information P/N 1-960496-00 Edition 1 January 2001 Read this information before connecting the printer to a scale! Intermec Scale- Connected Printers...
Page 2
Easycoder F4 and Easycoder F2 covered by certifi cate No. 0402-MVm030 Easycoder E4 covered by certifi cate No. 0402-MVm031 Printers approved for scale-connection can be identifi ed by a sign of approval on the machine label on the printer's rear or bottom...
Page 3
PC and is stored in non-volatile memory (fl ash, memory card) and recalled with the LAYOUT RUN "xxxx" command. Intermec Scale-Connected Printers – Important Information Ed. 1 Retrieve already stored format and read values...
Page 4
Software Used, cont. Intermec Scale-Connected Printers – Important Information Ed. 1 Example of a layout: LAYOUT INPUT "LAY1" AN 6:FT "Swiss 721 BT",10 PP 100,170:PT VAR1$ PP 430,170:PT VAR3$ PP 430,40:PT VAR6$ AN 6:PP 100,200:PT "Tara kg" AN 6:PP 300,200:PT "Netto kg"...
For the EasyCoder F2 and F4 family: To verify the fi rmware used in printer, follow the sequence below. - Connect a PC to the serial port of the printer instead of a scale - Start a terminal program. - Set PC to 9800 baud, 8 bit, parity none, 1 stop bit.