Vfd Parameters Screen; The Vfd Parameters Screen - Pro Mach Orion CTS Flex Stretchwrapper Manual

Orion
Revision 3.0
25 July 2016

VFD Parameters Screen

Figure 3 - 22
The VFD Parameters
Screen
Table 3-21. The VFD Parameters Screen Button Descriptions
STATE 1
NOT IDENTIFIED
1/2 HP IDENTIFIED
1 HP IDENTIFIED
SELECT VFD SIZE
1/2 HP SELECTED
1 HP SELECTED
DOWNLOAD CARRIAGE
DOWNLOAD MAIN
DRIVE
DOWNLOAD
MULTISTRETCH
DOWNLOAD WRAP
ZONE
This is the VFD Parameters screen. On this screen, you can identify the horsepower for
each drive or transfer VFD parameters from the PLC to the VFD's.
Displayed if the machine cannot automatically identify the size of VFD currently
installed. In this case, the VFD size must be manually selected before downloading.
Displayed if the machine identifies the current VFD as half horsepower drive.
Displayed if the machine identifies the current VFD as a one horsepower drive.
If the machine cannot automatically identify the size of the VFD, press this button
to manually select the size of VFD currently installed.
Displayed if the current VFD is manually selected as a half horsepower drive.
Displayed if the current VFD is manually selected as a one horsepower drive.
Downloads the default Carriage VFD parameters from the PLC to the VFD.
Downloads the default Main Drive VFD parameters from the PLC to the VFD.
Downloads the default Multistretch VFD parameters from the PLC to the VFD.
Downloads the default Wrap Zone VFD parameters from the PLC to the VFD.
DESCRIPTION
Machine Manual
CTS Flex Stretchwrapper
System Operation
Page 3-29