Table of Contents
Advertisement
Machine Manual
CTS Flex Stretchwrapper
Maintenance
HPA LPA Series
Page 5-8
5,760 Loads or one month
•
Inspect rubber stretch rollers. Clean as needed per instructions in manual.
•
Inspect belt condition. Adjust as needed.
17,280 Loads or three months.
•
Inspect under turntable. Clean debris as needed.
•
Inspect turntable support casters for good condition.
•
Inspect turntable chain. Apply a light coating of lubricant per instructions in manual.
•
Inspect prestretch chain and belt. Tension as needed. Apply a light coating of lubricant
per instructions in manual.
•
Check the cutter wire for excessive buildup. Replace if kinked or bent.
•
Inspect the pneumatic hardware. Adjust as needed.
34,560 Loads or 6 months.
•
Lubricate ring bearing
•
Inspect carriage lift chain. Tension and lubricate per instructions in manual.
•
Inspect commutator assembly. Blow out debris per instructions in the manual.
Orion
Revision 3.0
25 July 2016
Advertisement
Table of Contents
