Machine Manual
CTS Flex Stretchwrapper
System Operation
Reinforce Wrap Setup
Figure 3 - 16
The Reinforce Setup
Screen
Table 3-15. The Reinforce Wraps Screen Button Descriptions
STATE 1
REINFORCE WRAPS
Page 3-22
This is the Reinforce Wraps Setting Screen. This screen allows the user to set the number
of reinforce wraps that are applied when the reinforce button on the Run Screen is pressed.
Press this button to set the number of reinforce wraps that are applied when the
enable reinforce wraps button is pressed on the Run screen.
DESCRIPTION
Orion
Revision 3.0
25 July 2016