Viewing And Selecting Parameters; The Menu Screen; The Parameter Show Screen; The Parameter Set Screen - Pro Mach Orion SENTRY System Manual

Sentry by Orion
Semi-Automatic Stretch Wrapping Machine
System Operation

Viewing and Selecting Parameters

Figure 3 - 6

The Menu Screen

Figure 3 - 7
The Parameter Show
Screen
Figure 3 - 8
The Parameter Set
Screen
Page 3-6
1. Plug in the machine to a 110 power supply.
2. Turn the Power On/ Off Switch to the ON position.
3. On the Menu screen, press 4 to show the current parameters.
4. This screen shows the current settings. If you are happy with these settings, continue
to the next section. See "Selecting a Program" on page 3 - 9. Press ESC to go back to
the Menu Screen.
5. On the Menu Screen, press 1 for Param Set. The Select Parameter Screen will display.
Orion
Revision 2.8
27 August 2014