Table of Contents
Advertisement
Machine Manual
CTS Flex Stretchwrapper
System Operation
Carriage Obstacle Detect Error Recovery
Figure 3 - 1
Pulling Strap to
Release Brake
Figure 3 - 2
Limit Switch
Alignment
Page 3-2
1. When the obstacle detect error occurs, the brake must be released.
2. To release the brake, pull outward on the carriage strap on the front side of the tower
until the brake releases.
3. Align the limit switch on the inside of the tower with the center of the strap.
4. Reset and restart, when ready.
Orion
Revision 3.0
25 July 2016
Advertisement
Table of Contents
