Table of Contents
Advertisement
Orion
Revision 3.1
21 May 2020
The VFD Parameters Screen
Figure 3 - 31
The VFD Parameters
Screen
Table 3-27. The VFD Parameters Screen Button Descriptions
STATE 1
NOT IDENTIFIED
1/2 HP IDENTIFIED
1 HP IDENTIFIED
SELECT VFD SIZE
1/2 HP SELECTED
1 HP SELECTED
DOWNLOAD MAIN
DRIVE
DOWNLOAD CARRIAGE
DOWNLOAD
MULTISTRETCH
DOWNLOAD ALL VFD'S
This is the VFD Parameters screen. On this screen, you can identify the horsepower for
each drive or transfer VFD parameters from the PLC to the VFD's.
Displayed if the machine cannot automatically identify the size of VFD currently
installed. In this case, the VFD size must be manually selected before downloading.
Displayed if the machine identifies the current VFD as half horsepower drive.
Displayed if the machine identifies the current VFD as a one horsepower drive.
If the machine cannot automatically identify the size of the VFD, press this button
to manually select the size of VFD currently installed.
Displayed if the current VFD is manually selected as a half horsepower drive.
Displayed if the current VFD is manually selected as a one horsepower drive.
Downloads the default Main Drive VFD parameters from the PLC to the VFD.
Downloads the default Carriage VFD parameters from the PLC to the VFD.
Downloads the default Multistretch VFD parameters from the PLC to the VFD.
Downloads the default VFD parameters from the PLC to the VFD.
Sentry HP/ LP Flex Stretchwrapper
DESCRIPTION
Machine Manual
System Operation
Page 3-37
Advertisement
Table of Contents
