Orion
Revision 3.0
25 July 2016
3.
System Operation
Operating Procedures
How to Start and Shut Down Your Wrapping System
Note:
Do not use extension cords. Plug your Flex Stretch-wrapper directly
into an outlet.
POWER SWITCH
Located on the panel door, the lockable power switch has two settings:
•
ON - connects a power source to the machine.
•
OFF - disconnects the power source.
START AND EMERGENCY STOP SWITCHES
•
Press the START button to gain Control Power prior to starting.
•
The START switch is used to start the cycle once the load is available.
•
The cycle may be stopped at anytime by pressing the E-STOP button.
The FLEX series machines are engineered to give the operator different levels of opera-
tion, the front panel or USER settings, and MENU DRIVEN parameters. The menu driven
parameters offer even more flexibility and security.
Machine Manual
CTS Flex Stretchwrapper
System Operation
Page 3-1