Table of Contents
Advertisement
Orion
Revision 3.0
25 July 2016
RTD Series
RTA Series
@ 5760 Loads or one month
•
Inspect rubber stretch rollers. Clean as needed per instructions in manual.
•
Inspect belt condition. Adjust as needed.
@ 17, 280 Loads or three months.
•
Inspect tower drive chain. Apply a light coating of lubricant per instructions in man-
ual.
•
Inspect prestretch chain and belt. Tension as needed. Apply a light coating of lubricant
per instructions in manual.
•
Inspect the pneumatic hardware. Adjust as needed.
@ 34, 560 Loads or 6 months.
•
Lubricate ring bearing per instructions in manual.
•
Inspect carriage lift chain. Tension and lubricate per instructions in manual.
•
Inspect commutator assembly. Blow out debris per instructions in the manual.
5760 Loads or one month
•
Inspect rubber stretch rollers. Clean as needed per instructions in manual.
•
Inspect belt condition. Adjust as needed.
17, 280 Loads or three months.
•
Inspect tower drive chain. Apply a light coating of lubricant per instructions in man-
ual.
•
Check the cutter wire for excessive buildup. Replace if kinked or bent.
•
Inspect prestretch chain and belt. Tension as needed. Apply a light coating of lubricant
per Instructions in this manual.
•
Inspect the pneumatic hardware. Adjust as needed.
34, 560 Loads or 6 months.
•
Lubricate ring bearing per instructions in manual.
•
Inspect carriage lift chain. Tension and lubricate per instructions in manual.
•
Inspect commutator assembly. Blow out debris per instructions in this manual.
Machine Manual
CTS Flex Stretchwrapper
Maintenance
Page 5-9
Advertisement
Table of Contents
