Tower Raceways Maintenance; Chain Maintenance - Pro Mach Orion CTS Flex Stretchwrapper Manual

Stretch-wrapping equipment
Table of Contents

Advertisement

Machine Manual
CTS Flex Stretchwrapper
Maintenance

Tower Raceways Maintenance

Note:

Chain Maintenance

Note:
Page 5-2
The film distributor (carriage) is sliding on the plastic guides attached behind its back
plate. The section of the tower on which the plastic guides move (raceways) should be
cleaned and re-greased approximately every 600 hours of machine operation.
If the machine works in a dusty and corrosive environment, the race-
ways should be re-greased more often (at least every 100 hours).
To clean the stretch chain, wipe it with an oily cloth once a service.quarter.
When machine is working in a dusty and damp environment, it may be necessary to repeat
the cleaning operation more often.
Regarding chain lubricants please use the most common chain lubricants on the market.
With time, the chain will tend to stretch.
The tower is equipped with automatic chain tensioner and does not need any adjustment.
First chain tension inspection must be done after the first two weeks
of machine usage.
Orion
Revision 3.0
25 July 2016

Advertisement

Table of Contents
loading

Table of Contents