Transferring Videos From Dvr To Server; Automatic Transmission; Manual Transmission - L3 Mobile-Vision Flashback3 User Manual

DVR Operation

Transferring Videos from DVR to Server

15 Press
 MIC #1. Play the audio track for the wireless mic that's connected to port VLP 1.
 MIC #2. Play the audio track for the wireless mic that's connected to port VLP 2.
 MIC #3. Play the audio track for the in-car mic.
16 Press
17 Press
video/audio track. Depending on your selections and camera configuration, this may
be a single or "split-screen" view. For example, if you selected Cam #2 and you
have four cameras recording on Channel 2—a Backseat camera and three Bullet
cameras—then all four views will play simultaneously on one screen that's divided
into four quadrants.
18 When you're done viewing the video(s), press
Transferring Videos from DVR to Server
Transmission refers to the process of transferring video files from your in-car DVR to
the storage server back at your agency or precinct. This transmission can occur either
automatically (typical) or manually, as described below.

Automatic Transmission

Whenever your vehicle comes within approximately 300 feet of an access point, it
triggers an automatic transmission
currently stored on your DVR will transfer wirelessly to the storage server via an
access point (for more on access points, see Glossary). Automatic transmission does
not require any action on your part.

Manual Transmission

Each Flashback DVR holds a storage device called an SD card. This card is used to
temporarily store an officer's videos until they can be transferred to your agency's
storage server. Typically, the SD card remains in the Flashback unit, as most video
files will transmit automatically. However, if you can't wait for the automatic file
transfer to occur, or a problem has occurred that interfered with the wireless file
transfer, you can manually upload the videos yourself by removing the SD card and
inserting it in an SD card reader connected to your PC workstation on the server. (For
specific instructions, see "Manually Uploading New Videos" in chapter 2 of the DEP
User's Guide or DEP Administrator's Guide.) When you are finished uploading the
videos, re-insert the SD card in your Flashback unit.
Unless the DVR is in RECORD mode, in which case the transfer will occur AFTER the recording is complete.
*
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
until the desired audio track displays, as described below.
to save your audio selection.
again to exit the Select Source menu and begin playing the selected
to exit the Playlist screen.
*
. During this transmission, all videos that are
P a g e 31